previous arrow
next arrow
ArrowArrow
Slider

ULTITEC 3000T

Premium Oil, Saturated Liquid Splash, and Biohazard Resistant Protective Clothing

Excellent barrier for saturated liquid and oil. It offers good protection and breathability with Type 4 certification.

Features

  • Outstanding barrier against oil and heavy liquid splash, reaches the highest standard of biohazard protection.
  • Sealed seam for premium protection against liquid leakage.

Note*: The WHO recommended specification for coveralls against filovirus disease issued in Oct, 2014 stated that healthcare workers should choose appropriate protective apparel, which meets the following two requirements:

option 1, tested for resistance to blood and body fluid penetration: meets or exceeds ISO 16603 class 3 exposure pressure

option 2, tested for resistance to blood-borne pathogen penetration; meets or exceeds ISO 16604 class 2 exposure pressure.

  • TYPE 4 EN 14605 Spray Tight Suits- Suits which can protect against saturation of liquid chemical, where volume of the liquid builds up on the suit forming pools, resulting in rivulets.
  • TYPE 5 EN ISO 13982-1 Dry Particle Suits-Suits for protection against hazardous dusts and any dry particles.
  • TYPE 6 EN 13034 reduced spray -suits which offer limited protection against a light spray of liquid chemicals.
  • EN 1149-5 Electrostatic dissipative protective clothing with a surface resistance of maximum 2.5×10 exp 9 ohm.
  • EN 1073-2 Protective clothing against particulate radioactive contamination.
  • EN 14126 Protective clothing can resist against biological hazards and infective agents.

Applications

Agriculture, Automotive, Biological Hazards, Chemical Plants, Disaster Management, Petrochemical, Pharmaceutical, Painting

Color

  • White/Blue

Product Technology

Seam Construction

4-thread Overlocked Seam with Liquid-proof Tape

  • 7-9 stitches per inch
  • Thread fiber is 150D
  • Bite depth at 4 mm
Fabric Construction

Microporous Film Laminate PPSB

  • Ret Value: 21.0 m²*Pa/W

Back Fabric
Multilayer SMS fabric

Performance Chart
  • Scroll the form to see more.
FABRIC PHYSICAL PROPERTIES TEST METHOD CLASS
Abrasion Resistance EN ISO 12947-2 2
Flex Cracking Resistance EN ISO 7854-B 6
Trapezoidal Tear Resistance EN ISO 9073-4 2
Tensile Strength EN ISO 13934-1 1
Puncture Resistance EN 863 2
Seam Strength EN ISO 13935-2 3
Antistaticity EN 1149-5 Pass
pH Value EN ISO 3071 Pass
Resistance to Ignition EN 13274-4 Pass
Moisture Vapor Transmission Rate (MVTR) ASTM E96B 7,123 g/m²*24hr
Water Vapour Resistance (Ret) EN ISO 11092 21.0 m²*Pa/W
FABRIC CHEMICAL PROPERTIES TEST METHOD PENETRATION REPELLENCY
Sulfuric Acid 30% EN ISO 6530 Class 3 Class 3
Sodium Hydroxide 10% EN ISO 6530 Class 3 Class 3
o-Xylene EN ISO 6530 Class 3 Class 3
Butan-1-ol EN ISO 6530 Class 3 Class 3
AGAINST INFECTIVE AGENTS with EN 14126 TEST METHOD CLASS
Resistance to penetration by blood / fluids ISO 16603 6
Resistance to penetration by blood-borne pathogens ISO 16604 6
Resistance to wet microbial penetration ISO 22610 6
Resistance to liquid aerosol penetration ISO/DIS 22611 3
Resistance to dry microbial penetration ISO 22612 3
WHOLE SUIT TEST PERFORMANCE RESULT
Type 4 Spray Test Pass
Type 5 Inward Leakage Test Pass
Type 6 Low Level Spray Test Pass
EN 1073-2 Against Radioactive Contamination Class 1

Coverall Size Chart

SIZE CHEST(CMS) HEIGHT(CMS)
S 84-92 162-170
M 92-100 170-176
L 100-108 176-182
XL 108-116 182-188
2XL 116-124 188-194
3XL 124-132 194-200
4XL 132-140 200-206

PDF Download