Designed as an effective barrier to saturated liquid splash. It combines liquid-proof fabric with sealed tape seam while keeping breathable with Type 4 certification
ULTITEC 3000T
Premium Oil, Saturated Liquid Splash, and Biohazard Resistant Protective Clothing
Features
- Proven protection against pesticides
- Breathable to Work Efficiently
- Low linting
- Sealed seam offers premium protection
- Passed ASTM F1670 Synthetic Blood Penetration Test for biohazard protection
Note*: The WHO recommended specification for coveralls against filovirus disease issued in Oct, 2014 stated that healthcare workers should choose appropriate protective apparel, which meets the following two requirements:
option 1, tested for resistance to blood and body fluid penetration: meets or exceeds ISO 16603 class 3 exposure pressure
option 2, tested for resistance to blood-borne pathogen penetration; meets or exceeds ISO 16604 class 2 exposure pressure.
- TYPE 4 EN 14605 Spray Tight Suits- Suits which can protect against saturation of liquid chemical, where volume of the liquid builds up on the suit forming pools, resulting in rivulets.
- TYPE 5 EN ISO 13982-1 Dry Particle Suits-Suits for protection against hazardous dusts and any dry particles.
- TYPE 6 EN 13034 reduced spray -suits which offer limited protection against a light spray of liquid chemicals.
- EN 1149-5 Electrostatic dissipative protective clothing with a surface resistance of maximum 2.5×10 exp 9 ohm.
- EN 1073-2 Protective clothing against particulate radioactive contamination.
- EN 14126 Protective clothing can resist against biological hazards and infective agents.
Applications
- Agriculture
- Automotive
- Biological Hazards
- Chemical Plants
- Disaster Management
- Petrochemical
- Pharmaceutical
- Painting
Color
- White
Product Technology
Seam Construction
4 thread overlovked seam with liquid-proof tape
- 7-9 stitches per inch
- Thread fiber is 150D
- Bite depth at 4 mm
Fabric Construction
Microporous Film Laminate PPSB
- Ret Value: 21.0 m²*Pa/W
Back Fabric
Multilayer SMS fabric
Performance Chart
- Scroll the form to see more
| FABRIC PHYSICAL PROPERTIES | TEST METHOD | CLASS |
|---|---|---|
| Abrasion Resistance | EN ISO 12947-2 | 2 |
| Flex Cracking Resistance | EN ISO 7854-B | 6 |
| Trapezoidal Tear Resistance | EN ISO 9073-4 | 2 |
| Tensile Strength | EN ISO 13934-1 | 1 |
| Puncture Resistance | EN 863 | 2 |
| Seam Strength | EN ISO 13935-2 | 3 |
| Antistaticity | EN 1149-5 | Pass |
| pH Value | EN ISO 3071 | Pass |
| Resistance to Ignition | EN 13274-4 | Pass |
| Moisture Vapor Transmission Rate (MVTR) | ASTM E96B | 7,123 g/m²*24hr |
| Water Vapour Resistance (Ret) | EN ISO 11092 | 21.0 m²*Pa/W |
| FABRIC CHEMICAL PROPERTIES | TEST METHOD | PENETRATION | REPELLENCY |
|---|---|---|---|
| Sulfuric Acid 30% | EN ISO 6530 | Class 3 | Class 3 |
| Sodium Hydroxide 10% | EN ISO 6530 | Class 3 | Class 3 |
| o-Xylene | EN ISO 6530 | Class 3 | Class 3 |
| Butan-1-ol | EN ISO 6530 | Class 3 | Class 3 |
| AGAINST INFECTIVE AGENTS with EN 14126 | TEST METHOD | CLASS |
|---|---|---|
| Resistance to penetration by blood / fluids | ISO 16603 | 6 |
| Resistance to penetration by blood-borne pathogens | ISO 16604 | 6 |
| Resistance to wet microbial penetration | ISO 22610 | 6 |
| Resistance to liquid aerosol penetration | ISO/DIS 22611 | 3 |
| Resistance to dry microbial penetration | ISO 22612 | 3 |
| WHOLE SUIT TEST PERFORMANCE | RESULT | |
|---|---|---|
| Type 4 | Spray Test | Pass |
| Type 5 | Inward Leakage Test | Pass |
| Type 6 | Low Level Spray Test | Pass |
| EN 1073-2 | Against Radioactive Contamination | Class 1 |
Coverall Size Chart
| SIZE | CHEST(CMS) | HEIGHT(CMS) |
|---|---|---|
| S | 84-92 | 162-170 |
| M | 92-100 | 170-176 |
| L | 100-108 | 176-182 |
| XL | 108-116 | 182-188 |
| 2XL | 116-124 | 188-194 |
| 3XL | 124-132 | 194-200 |
| 4XL | 132-140 | 200-206 |
