ULTITEC 2000

Premium Oil, Liquid Splash & Infective Agents Resistant Protective Clothing

Designed to protect wearers against heavy liquid splash and biological hazards. The most popular and widely applied choice in various industries

Features

An Effective Barrier Against Blood, Body Fluids and Infective Agents
Proven protection against pesticides
Breathable to Work Efficiently

Note*: The WHO recommended specification for coveralls against filovirus disease issued in Oct, 2014 stated that healthcare workers should choose appropriate protective apparel, which meets the following two requirements:

option 1, tested for resistance to blood and body fluid penetration: meets or exceeds ISO 16603 class 3 exposure pressure.

option 2, tested for resistance to blood-borne pathogen penetration; meets or exceeds ISO 16604 class 2 exposure pressure.

Note**: ULTITEC 2000 coverall is suitable for both ISO 14644-1 and US FED-STD 209E cleanroom standard. Test result shown in the following table:

TYPE 5 EN ISO 13982-1 Dry Particle Suits-Suits for protection against hazardous dusts and any dry particles.
TYPE 6 EN 13034 reduced spray -suits which offer limited protection against a light spray of liquid chemicals.
EN 14126 Protective clothing can resist against biological hazards and infective agents.
EN 1073-2 Protective clothing against particulate radioactive contamination.
EN 1149-5 Electrostatic dissipative protective clothing with a surface resistance of maximum 2.5×10 exp 9 ohm.

Applications

Agriculture
Automotive
Biological Hazards
Disaster Management
Disease Control
Electronic Industries
Pharmaceutical
Petrochemical
Painting

Color

White

Product Technology

Seam Construction

4 thread overlovked seam

7-9 stitches per inch
Thread fiber is 150D
Bite depth 4 mm

Fabric Construction

Microporous Film Laminate PPSB

Ret Value: 21.0 m²*Pa/W

Back Fabric
Multilayer SMS fabric

Performance Chart

Scroll the form to see more

PHYSICAL PROPERTIES	TEST METHOD	CLASS
Abrasion Resistance	EN ISO 12947-2	2
Flex Cracking Resistance	EN ISO 7854-B	6
Trapezoidal Tear Resistance	EN ISO 9073-4	2
Tensile Strength	EN ISO 13934-1	1
Puncture Resistance	EN 863	2
Seam Strength	EN ISO 13935-2	3
Antistaticity	EN 1149-5	Pass
pH Value	EN ISO 3071	Pass
Resistance to Ignition	EN 13274-4	Pass
Moisture Vapor Transmission Rate (MVTR)	ASTM E96B	7,123 g/m²*24hr
Water Vapour Resistance (Ret)	EN ISO 11092	21.0 m²*Pa/W

CHEMICAL PROPERTIES	TEST METHOD	PENETRATION	REPELLENCY
Sulfuric acid 30%	EN ISO 6530	Class 3	Class 3
Sodium Hydroxide 10%	EN ISO 6530	Class 3	Class 3
o-Xylene	EN ISO 6530	Class 3	Class 3
Butan-1-ol	EN ISO 6530	Class 3	Class 3

AGAINST INFECTIVE AGENTS with EN 14126	TEST METHOD	CLASS
Resistance to penetration by blood / fluids	ISO 16603	6
Resistance to penetration by blood-borne pathogens	ISO 16604	6
Resistance to wet microbial penetration	ISO 22610	6
Resistance to liquid aerosol penetration	ISO/DIS 22611	3
Resistance to dry microbial penetration	ISO 22612	3